Passkey Sign-In on Your Custom URL

What is Passkey Sign-In?

A passkey is a sign-in key that a person's phone or computer keeps for them and unlocks with the device's own PIN, fingerprint or face scan. When you turn on Passkey Login, your Staff and Clients can add a passkey on your Custom URL and then sign in there with one tap: no email, no password and no 6-digit code.

A passkey can do three jobs on your Custom URL:

  • Sign in on its own. The Sign In with a Passkey button signs the person straight in.
  • Act as the second step. After a password, Google, Microsoft or Magic Link sign-in, a person who owes a second step can confirm with their passkey instead of typing a code.
  • Count as Two-Factor protection. If you require Two-Factor Authentication, a passkey satisfies that requirement just as an authenticator app does.

Login page showing the Sign In with a Passkey button above the email and password fields

IMPORTANT: Passkeys work only on your own Custom URL (or your reseller subdomain), never on the platform's shared sign-in address. Each passkey is tied to the exact address it was made on.


What do I need before I start?

  • An active Custom URL with a working security certificate, or an active reseller subdomain. Setting up your Custom URL explains how.
  • A plan that includes the Custom URL & Login Page settings. There is no separate passkey add-on.
  • To require Two-Factor Authentication (and have passkeys count toward it), the PLUS Power-Up. Signing in with a passkey works without it.

How do I turn on Passkey Login?

1 Open your Custom URL & Login Page settings.

2 Scroll to the login options. Below Google and Microsoft you will find Passkey Login.

3 Switch on Enable "Sign In with a Passkey" on Login Page.

Passkey Login switch turned on in the Custom URL and Login Page settings

4 Click Save.

Passkey Login is off for every account until you turn it on. Once it is on, your login page greets people with Welcome back and Sign in to your business name, shows Sign In with a Passkey beside any Google and Microsoft buttons, and labels the password button Sign In with Password.

TIP: Let your Clients and Staff know you have turned it on. Most people add their first passkey from the invitation described below, without ever visiting their Security page.


How does someone add a passkey?

Anyone, Staff or Client, adds their own passkey while signed in on your Custom URL. There are two ways in.

From the invitation. After someone signs in on your Custom URL with their typed password, a notice at the top of the page says Sign in faster next time with a passkey. They can choose Add Passkey, Not Now (asks again after a password sign-in at least 30 days later) or Don't Ask Again (stops the invitation for good, on every device).

Invitation banner reading Sign in faster next time with a passkey, with Add Passkey, Not Now and Don't Ask Again

From My Account > Security. In the Sign-in Methods section, the Passkeys block lists the person's passkeys for your business and has an Add Passkey button.

Passkeys block on the Security page with the Add Passkey button and one saved passkey

Either way, the Add Passkey panel opens:

1 Give the passkey a name you will recognize, such as the device it lives on. A name is suggested for you.

2 If it has been more than 10 minutes since you signed in with your password, enter your current password (and your authenticator code if you use one). If you already have a passkey on this address, you can choose Confirm with a Passkey instead.

3 Click Create Passkey and confirm with your device's PIN, fingerprint or face scan.

Add Passkey panel with the Passkey Name field and the Create Passkey button

You will see Passkey added for this company. The passkey appears in the list with its name, the date it was added and the address it works on. A security email confirms when it was added, and anyone who did not yet have Recovery Codes is shown a set to save.

TIP: You can reword the passkey security email under Email Templates, for example to add your own support contact.


How does someone sign in with a passkey?

On your Custom URL's login page they click Sign In with a Passkey, pick their passkey if the device asks, and confirm with their PIN, fingerprint or face scan. There is no email to type, and no code is asked for afterward. Their password keeps working as well.

If the device prompt is canceled or the passkey cannot be used, the page says This passkey could not be used here. Try again, or use your password instead.

When someone signs in with a password (or Google, Microsoft or a Magic Link) and owes a second step, a person with a passkey sees Confirm with a Passkey. If they also have an authenticator app, Use a Code Instead is offered beside it, and Lost your device? Use a recovery code is always there.


How do passkeys work with required Two-Factor Authentication?

When you require Two-Factor Authentication for Staff, Clients or both, a covered person who adds a passkey on your Custom URL counts as protected, exactly as if they had set up an authenticator app. They stop receiving setup reminders and appear as set up in your Who Is Set Up lists.

  • Recovery Codes for everyone. Everyone who has a second step, an authenticator or a passkey, now receives one-time Recovery Codes, not only the Super Admin.
  • Their passkey is their second step everywhere. Someone whose only second step is a passkey cannot get in with a password alone on another address. They are sent to your Custom URL to confirm with their passkey.
  • The last passkey cannot be removed by mistake. If the requirement depends on someone's only passkey, removing it is refused until they add another passkey or an authenticator app.
  • Resets cover passkeys. Resetting someone's Two-Factor Authentication is offered for people with an authenticator or any passkey, and it clears both.

IMPORTANT: Turning Passkey Login off means passkeys no longer count as protection. If anyone relies on a passkey as their only second step, you are warned first with how many people that affects. Everyone keeps their passkeys, and they work again when you turn Passkey Login back on.


What happens if I change my Custom URL?

Because each passkey belongs to one address, changing your Custom URL (or renaming a reseller subdomain) affects them. When you click Change my Custom URL, you are first told how many people hold passkeys on the current address and how many rely on one as their only second step. If nobody does, nothing extra is asked.

Passkeys made on the old address stop working as soon as you continue. Their owners see them on their Security page marked Stopped Working, with the address they were made for and a Remove button. People can sign in with their password, add a new passkey on the new address, or finish a required second step with a Recovery Code or an Admin reset.


Where are passkeys not available?

  • The platform's shared sign-in address, whatever your settings.
  • The Login Block on your pages and the mobile and desktop apps. These keep their usual sign-in, and someone who owes a passkey step is directed to sign in on the web at your Custom URL.
  • While you are logged in as someone else, or before an account has a password.

RELATED ARTICLES

CLICK HERE to learn about signing in with Google and Microsoft.

CLICK HERE to learn about Two Factor Authentication.

CLICK HERE to learn about requiring and resetting Two-Factor Authentication.

CLICK HERE to learn how to set up your Custom URL.

CLICK HERE to learn how to customize your Login Page.