PROJECTS: Hourly Rates on Tasks & Projects

What are Hourly Rates on Tasks and Projects?

An Hourly Rate can belong to the work itself. Set a rate once on a Project or a Task, and every Timer on that work bills at it, whoever on your team runs the clock.

This helps when one person does work at different prices. For example, an accountant does tax planning at 200.00 an hour and bookkeeping at 150.00 an hour. With the rate on the work, nobody corrects Timers by hand, and no hour is billed at the wrong price.

Around the rate you also get:

  • A Billable switch, so internal work is tracked but never invoiced.
  • Change Hourly Rate, which asks how far back a new rate reaches. Invoiced time is never repriced.
  • Require a Task before a Timer stops, so no hour is left unassigned.
  • Invoice lines your Clients can read, with an optional time report PDF.
  • Mark as Billed, for time you already billed another way, such as a retainer.
  • Pinned Timers and Tags, to start your usual work quickly and find it again.
  • Display Time & Spend to Client, so a Client can see their own hours and spend on a Project.

CLICK HERE to learn about Timers & the Time Tracking Widget

NOTE: Rates set on Tasks, Projects, Task Templates and Project Generators, and the account's Default Hourly Rate, are shown only to Staff who can invoice Timers or who can see all Timers. Other Staff still pick Tasks and Projects and track time. They do not see those rates or the amounts priced from them.


Where does a Timer's rate come from?

A Timer takes the first rate it finds, in this order:

  1. A rate typed on the Timer itself. It wins until you clear it.
  2. The Task's Hourly Rate.
  3. The Project's Hourly Rate.
  4. The Staff Member's own Hourly Rate.

If none of these has a rate, the Timer uses the rate of that Staff Member's most recent Timer that had one.

To see where a Timer's rate came from, open the Timer, go to its Details tab and point at the ? beside Hourly Rate. It reads, for example, "Rate source: From Task Tax Planning. All entries on this timer are billed at this rate." The source is one of From Task, From Project, Staff Rate or Typed.

A Timer's Details tab with the rate source note open, reading Rate source: From Task Tax Planning

Each Time Entry keeps the rate it was tracked at, so one Timer can hold time at two rates.

CLICK HERE to learn about Staff Hourly Rates


How do I set an Hourly Rate on a Project?

  1. Navigate to Projects and edit the Project.
  2. Open the Billing section. It holds the hourly rate this Project's time is billed at, and whether its time can be invoiced.
  3. Leave Billable on, then enter the Project Hourly Rate.
  4. Save.

A Timer uses the Task's rate first, then this Project rate, then the Staff Member's Hourly Rate.

The Billing section of the Edit Project form, with Billable switched on above a Project Hourly Rate of 150.00

TIP: When you add a new Project, the Hourly Rate field is already filled in with your account's Default Hourly Rate. Change it for any Client who pays a different price. The Billable switch appears once the Project is saved, on its edit form.


How do I set an Hourly Rate on a Task?

  1. Add or edit the Task.
  2. Leave Billable on, then enter the Hourly Rate.
  3. Save.

The Edit Task window with Billable switched on and an Hourly Rate of 200.00

If the Task's Hourly Rate is empty, the Project's Hourly Rate is used. While it is empty and the Project has a rate, the field shows that rate in gray, for example Project Hourly Rate: 150.00, so everyone knows what an hour will bill before the clock starts.

The Edit Task window for a Task with no rate of its own, the empty Hourly Rate field showing Project Hourly Rate: 150.00 in gray


What is the Default Hourly Rate?

The Default Hourly Rate is the hourly rate filled in when a new Project or Project Generator is created. You can change it on each Project and Generator.

  1. Navigate to Projects > Settings.
  2. Find the Timers section.
  3. Enter the Default Hourly Rate and save.

The Timers section of the Project Settings, with the Default Hourly Rate field and the Require a Task before a Timer stops switch

NOTE: The Default Hourly Rate only fills in the rate on new Projects and Project Generators. A Timer never reads it directly, and changing it does not affect existing Projects, Generators or Timers. Staff who can see rates can see this field. Only Staff who can invoice Timers can change it.


How do I price the Tasks of a Task Template?

Price a set of Tasks once on the Task Template, and each Task arrives in the new Project with its rate.

  1. Navigate to Projects > Task Templates and open the Template.
  2. Add or edit a Task in the Template.
  3. Set Billable, then the Hourly Rate. Turn Billable off for internal Tasks, such as an internal review.

The Template's Task list shows each Task's rate as an amount per hour, No Rate or Non-Billable.

A Task Template's Task list showing one Task at 200.00 per hour, one with No Rate and one marked Non-Billable

CLICK HERE to learn about Task Templates


How do I set Billable and the rate on a Project Generator?

A Project Generator carries its own Billable setting and Hourly Rate, in its Project Economics section.

  • Billable: every Project this Project Generator creates starts this way.
  • Hourly Rate: the hourly rate for every Project this Generator creates. If empty, the account's Default Hourly Rate is used.

The Project Economics section of a Project Generator, with Billable switched on and an Hourly Rate of 150.00

CLICK HERE to learn about Project Generators


What does Billable do?

Billable decides whether time is invoiced at all. Turn it off for internal work: the time is still tracked, but never offered for invoicing.

You find Billable on:

  • A Project, in its Billing section. Projects without a Client start as non-billable.
  • A Task. A Task you never switched follows its Project.
  • A Task Template's Task.
  • A Project Generator.
  • A Timer, on its Details tab under Settings.

On a Project, Task, Template Task and Project Generator, Billable comes before the Hourly Rate, and the Hourly Rate field shows only while Billable is on. Switching Billable off hides the field and keeps the saved rate.

The Billing section of the Edit Project form with Billable switched off, which hides the Project Hourly Rate field

A new Timer takes the setting from its Task, then from its Project. Changing Billable on a Task or Project applies to Timers started afterwards.


What happens when I pick a Task for a Timer later?

You can start the clock first and pick the work later. When you assign the Timer to a Task or a Project, its unbilled time moves to the rate of that work, and a notice says exactly what moved. For example:

  • "5h of unbilled time moves from 100/h to 200/h."
  • "New time is billed at 200/h instead of 100/h. There is no unbilled time to move."
  • "This timer keeps its typed rate." A rate typed on the Timer is never replaced by a Task pick.
  • "This timer keeps its current rate."

Time that is already invoiced keeps its rate.

A Timer's Assign tab with the Task Tax Planning picked and the notice 5h of unbilled time moves from 100/h to 200/h

NOTE: Staff who are not allowed to see rates get the same notice without the amounts, for example "5h of unbilled time moves to the new rate."


How do I use a special rate for one Timer?

Open the Timer's Details tab, type the rate into Hourly Rate and save. A typed rate wins until you clear it. When you clear it, the Timer goes back to the rate of its Task, then its Project, then the Staff Member.

A Timer's Details tab with a rate of 200.00 typed into Hourly Rate


How do I change a rate without changing past work?

When you change a rate that has unbilled time behind it, the Change Hourly Rate window asks how far back the new rate reaches:

  • From Now On: new time only.
  • From a Date: pick the first day that moves. The window shows how much time moves from that day.
  • All Unbilled Time: the window shows how much time moves.

Choose one and click Apply Rate. Cancel keeps the saved rate.

Invoiced time is never repriced.

The same question appears when you change the rate on a Task, a Project, a Staff Member or a Timer. When a change reaches many Timers, the window tells you they take the new rate in the background once saved.

The Change Hourly Rate window with the choices From Now On, From a Date and All Unbilled Time, and the line Invoiced time is never repriced


How do I require a Task before a Timer stops?

  1. Navigate to Projects > Settings.
  2. In the Timers section, turn on Require a Task before a Timer stops and save.

When on, Staff must assign a Timer to a Task or a Project before they can stop it, so its time is billed at the right rate. The Task does not need to belong to a Project. Timers already stopped are not affected.

When a Staff Member stops their own running Timer that has no Task and no Project, the Assign Before Stopping window opens: "This account requires a Task or Project on a Timer before it stops. Pick one, and the Timer stops." They pick the Project or Task and click Stop Tracking. If the pick changes the rate, a notice says what moved.

The Assign Before Stopping window with its Project and Task fields and the Stop Tracking button

NOTE: A Timer assigned only to a Client still needs a Task or a Project before it stops. The rule applies to the person stopping their own running Timer. Pausing a colleague's Timer and pausing several Timers at once are not held.


What is Non-Billable time?

Not every hour is for a Client. A Timer with Billable turned off is Non-Billable:

  • Its time is still tracked and counted.
  • It shows no rate or amount. On its Details tab, Hourly Rate reads Non-Billable.
  • It is never offered for invoicing. If you select it together with billable Timers and choose Invoice, it is skipped with the reason "Non-billable time is not invoiced."

To change it, open the Timer's Details tab and use the Billable switch under Settings.

The Details tab of a Non-Billable Timer: Hourly Rate reads Non-Billable and, under Settings, the Billable switch is off beside the Pin switch

NOTE: A Timer that has invoiced time cannot be switched off: "This timer has invoiced time, so it stays billable."


How do I invoice time the way each Client likes to read it?

  1. Navigate to Projects > Timers.
  2. Open a Timer's menu and choose Invoice. Its Time Entries open with the time selected. To invoice several Timers at once, click Select Timers and tick them instead.
  3. Click Apply Actions, then Invoice. The Add Time To window opens.

Invoice Line Items

  • One Line: adds one line item for each rate, totaling the time chosen at that rate.
  • Per Entry: adds one line item for each Time Entry, at its own rate. Needs two or more entries.

Show in Description

  • Timer Note: starts each One Line item's description with the Timer's own note. Per Entry line items never include it.
  • Entry Dates and Times: lists each Time Entry's date, time and duration in the line item description.
  • Entry Notes: adds each Time Entry's own note to the line item description.

Attachments

  • Attach a Time Report (PDF): attaches a PDF of the invoiced time to the Invoice: each entry's date, start and end, duration, price and amount. The Client sees it with the Invoice's attachments, in the Portal too.

Just above the Invoice and Cancel buttons, a summary line says what will be made, for example "New Invoice · 1 line item · 40.50 · time report attached".

The Add Time To window with New Invoice selected, One Line chosen, only Timer Note switched on, Attach a Time Report (PDF) on and the summary line above the buttons

The draft Invoice then carries the line the way you chose it. In this example, one line of 5 hours at 200.00 shows only the Timer's note in its description, and the time report is in the Invoice's attached files.

A draft Invoice with one line item of 5 hours at 200.00 and one attached file

CLICK HERE to learn about invoicing Timers


How do I close off time for a retainer Client with Mark as Billed?

Some Clients pay through a retainer. Invoicing them again would bill them twice, and deleting the hours would lose the history. Mark as Billed marks unbilled time as billed, at its rate, with no invoice.

  1. Navigate to Projects > Timers.
  2. Click Select Timers and tick that Client's Timers. For a single Timer, open its menu instead.
  3. Click Apply Actions, then Mark as Billed.
  4. Read the confirmation. It shows exactly what you are closing off, for example "Marks 12h of unbilled time on 3 Timers, 1,800.00, as billed with no invoice. This cannot be undone."
  5. Confirm with Mark as Billed.

The time then reads Billed and leaves your to-invoice lists, with no second invoice.

The Timers page with two Timers selected and the Apply Actions menu open on Mark as Billed

The Mark as Billed confirmation showing the unbilled time, the number of Timers, the amount and This cannot be undone

IMPORTANT: Mark as Billed cannot be undone. It is refused, with the reason shown, when all the time is already billed, when only the running entry is left (it can be marked once it stops), when the time is non-billable, or when the Timer has no recorded time.


How do I pin the Timers I start every day?

  1. Open the Timer and go to its Details tab.
  2. Under Settings, turn on Pin.

A Timer's Details tab with the Settings row, Billable and Pin side by side, Pin switched on

A pinned Timer is listed under Pinned, where one click starts a new Timer like it. You find Pinned in the Views column of the Timers page and in the header of the Time Tracking Widget. Your pins are your own.

The Pinned list on the Timers page with three pinned Timers

The new Timer starts with the pinned Timer's title, note, Task, Project or Client, Billable setting and Tags. Its rate is found fresh from the work, unless the pinned Timer had a typed rate that you are allowed to see.

NOTE: If the pinned Timer's Task, Project or Client is no longer available to you, the new Timer starts without it and a notice says so.


How do I tag Timers and filter by a Tag?

  1. Open the Timer and go to its Details tab.
  2. In Tags, pick a Tag, or type a new one if your Role may create Tags.
  3. Save.

On the Timers page, each row shows the Timer's first Tag, and a count such as +2 for the rest. Point at the count to read them all.

Timers on the Timers page, each showing its Tag under the title

To see only the work with one Tag, open the filters on the Timers page and choose it under Tags. For example, filter by an "Advisory" Tag to see all the advisory work your firm did, across every Client.

The filters on the Timers page with the Advisory Tag chosen under Tags


How do I show a Client their Time & Spend?

When a Client asks what they have spent so far, nobody should copy totals into an email by hand. You choose, Project by Project, whether the Client sees it.

  1. Open the Project and go to its Settings.
  2. Under Personalize to your Client, turn on Display Time & Spend to Client.

Every other Project stays as it was until you choose.

The Project's Settings with Display Time & Spend to Client switched on and its help note open

To have new Projects start with it on, navigate to Projects > Settings > Project Dashboard Settings and turn on Display Time & Spend to Client there. It is off by default, and each Project can change it in its own Settings.

NOTE: Only Staff who can invoice Timers see this switch.

What the Client sees

With the switch on, Clients on that Project see a Time & Spend card on its Project Dashboard:

  • The current month, for example November 2026: billable hours and the amount.
  • To Date: billable hours and the amount since the Project began.
  • Not Yet Invoiced: the amount not yet on an invoice.
  • Invoiced So Far: one progress bar, for example "70% of the billable time to date is on an invoice".

The Time & Spend card as a Client sees it on the Project Dashboard: the month, To Date, Not Yet Invoiced and the Invoiced So Far bar

When folded, the card's header still shows this month's hours and amount, and the amount not yet invoiced.

On their Projects list, the Client also sees one Time & Spend card above the list. It totals the Projects that show Time & Spend. This card appears only when those Projects use the same currency.

The Time & Spend card at the top of a Client's Projects list

What the Client never sees

  • Rates. Only hours and amounts are shown.
  • Non-Billable time. Internal work is never counted.
  • Time on a running Timer. It is added when the Timer stops.
  • Time with no rate.

Staff do not see the Time & Spend card. It is shown to Clients only.

TIP: Time you closed off with Mark as Billed counts as invoiced here. Time waiting on a Generator counts as not yet invoiced until the Generator creates its Invoice.

CLICK HERE to learn about the Project Dashboard


Related articles

CLICK HERE to learn about Projects

CLICK HERE to learn about Tasks

CLICK HERE to learn about Project Settings

CLICK HERE to learn about Internal Projects

CLICK HERE to learn about Reporting on tracked time